Oddbean new post about login | logout I didn't but I did check and it's on the current firmware.
I seemed to have fixed this issue but don't want to speak to soon but setting fan speed to 70% and clocking frequency and core voltage down seems to be averaging 1.07TH/s and temps from 50° to 60° so if it will hold here I'll accept it.
My Gamma was doing this too. I did the same and strapped another fan to the back side of the board to cool it down. So far, so good.
I run the raspi cooler with upgrade noctua fan on my bitaxe
I've seen people doing that online and that seems like a good setup.
Do you have a link for where I could find the cooler you're using? I want to change it up, but my amature method of trial and error for form and fit is annoying, lol
I've been playing with the setting trying to find a low wattage but high hashrate setup and so far the best I've gotten is out of 490 Frequency, 1150 Core Voltage and Fan Speed 80%, it hasn't went over 16.5W and it's staying between 975GH and 1.3TH. The fan being at a constant 80% seems to keep the temp between 50° and 67°ish I haven't seen it go higher as of yet. Hoping I finally can set it and forget it. Lol.