Oddbean new post about | logout
ā–² ā–¼
2cbfcc33 | 1 years ago (raw) | root | parent | reply | flag 
 @c76776cc @5756e48c Depending on how much weight you need, you can use resin - you can pour it, it will level-up nicely and it is heavy. If you need more weight, you can add steel balls or old coins, etc. to the resin.
ā–² ā–¼
~/phranck | 1 years ago (raw) | root | parent | reply | flag 
 @afe1f357 That is a good idea. Then I'll create a design in which a rear part is separated from the housing, and in which I pour resin - possibly with steel balls - into the gaps of the outer wall. šŸ¤”
ā–² ā–¼
2cbfcc33 | 1 years ago (raw) | root | parent | reply | flag 
 @c76776cc If you are going to redesign the bottom part, use either square or lightning infill - this will maximize the space for the resin and the balls.

Iā€™m looking forward to see what you decide and the completed speaker! šŸ˜€
ā–² ā–¼
~/phranck | 1 years ago (raw) | root | parent | reply | flag 
 @afe1f357 Yeah, you are right. The current Gyroid infill pattern won't work out as good as Grid.

Me too! šŸ˜ƒ
ā–² ā–¼
~/phranck | 1 years ago (raw) | root | parent | reply | flag 
 @afe1f357 Another way to get a bit more weight on the backside is to use a passive radiator there. šŸ˜ƒ

// @56826c59
ā–² ā–¼
~/phranck | 1 years ago (raw) | root | parent | reply | flag 
 @afe1f357 @56826c59 On the other hand... I'm in doubt that my driver will produce the amount of volume pressure needed for the radiator. šŸ¤”