Oddbean new post about | logout
▲ ▼
d0d29fd9 | 1 years ago (raw) | root | parent | reply | flag 
 @20ffb98d @5756e48c Another option would be printing 2+ at a time or a sacrificial tower just to get some time with nozzle away. Cura has a "lift head" alternative to this too but I find it oozes horribly.
▲ ▼
Koz Ross | 1 years ago (raw) | root | parent | reply | flag 
 @2b562a3e @5756e48c Sacrificial tower might work. I might also look into whether my fan ducting is suboptimal - I suspect it is, but CFD modelling isn't something I know how to do yet.
▲ ▼
d0d29fd9 | 1 years ago (raw) | root | parent | reply | flag 
 @20ffb98d @5756e48c My rule of thumb is that if there's a real duct (vs mounting the 5015s so the exit basically points the right way, possibly with the need for a single easy curve that doesn't reduce cross section significantly), it's very suboptimal.
▲ ▼
Koz Ross | 1 years ago (raw) | root | parent | reply | flag 
 @2b562a3e @5756e48c Then I'm most likely in that boat.