Pocket dump #edc https://image.nostr.build/14b793fa1f6e119837b376259f0f384f8762d41fc122e04da558ee6d9eba098e.jpg


My Current Recommendations for Mesh Radios by Use Case: Meshtastic or Reticulum as of block 870,000

(These should all have Reticulum firmware shortly on the community firmware GitHub)

📟 SeeedStudio T1000-e: My top choice for EDC (Everyday Carry) mesh node. It has no external antenna, waterproof, compact and reliable.

🔋 Rak WisBlock: My go to for building solar-powered repeaters. With ultra-low power usage, it’s perfect for long-term, remote setups.

📵 Lilygo T-Deck: For a standalone all-in-one device—no phone or tablet required.  It has the classic BlackBerry-style form factor, and once the new UI is ready, this will be a must have.  Everyone will want one, consider getting one before the rush comes.

💸 Heltec v3: If you’re just starting out, this is a low cost option is a solid entry-level unit and easy to find with a case included. Easy to experiment with and great for beginners.

🖨 Got a 3D printer? Skip the Heltec V3 and print your own case and dive straight into a custom Rak build. It is just slight more expensive and far better on power consumption.

#meshtastic #mesh #reticulum #sideband #nomadnet #ham #hamradio #amateurradio #radio #915mhz #meshradio #edc #offgrid #lora #diynetworking #heltec #lilygo #rak #seeedstudio #870000

https://sudoroom.org/mediawiki/images/5/59/Mesh_topology_diagram.png


ITM folks


https://www.tweaktown.com/news/101381/linux-creator-linus-torva
lds-ai-is-useless-its-90-marketing-while-he-ignores-for-now/index.html


 The power of sudo apt upgrade, after years trying to make a Quectel 5G module work at it should be, and never succeeding. Suddenly it improve after a system update.
This is the mystery of Linux
 https://image.nostr.build/7e35dcd8cbb44af010d67b1f394694161823da7cc64456a5848494dd7b56ecf0.png

#linux


ITM


You can get the same and cheaper from AliExpress. Also knives there are some interesting options that are good to test how it feels without breaking the bank.


Episode 31 of This Week in Bitcoin is OUT: https://www.thisweekinbitcoin.show/episodepage/welcome-to-inflation-valley

I lay out my view of the macro picture and why things can pump when everything is so broken. Plus, I gotta play some clips of Liz getting slammed over her crypto attacks, and I think I found some data about Bitcoin Hodler's impact on the election.

Enjoy!


Would that be caused by the farts of the people that got the mRNA poison. When the solar energy hit the gas particles it cause the redness.
The alerts are high for this night. One camera is already outside taking pictures every 33seconds


Went to a 10y birthday party. Guiding the kid to the #edc life. https://image.nostr.build/eaa43f880b1cae96bc9510928091f0f5680c6c5264bb997a3db7df3390f27da7.jpg


Recomendo ler este livro

https://en.m.wikipedia.org/wiki/How_to_Lie_with_Statistics


Nextcloud é o caminho pra nuvem


Some more climate change science 😂 https://image.nostr.build/08ecc88eb2cdee83347520a10f04605c08deec8b8642856127a80619995bf905.jpg


It’s obvious: Due to climate change
🤣


Feeling like going back to the roots of #edc
This was my carry today as my pockets were small https://image.nostr.build/3d711ec68997294487f5eb01a218fec8486e94740707906e6541f982e5cd3b57.jpg


Another example that automation just create more jobs. At least for experienced people that know Linux nostr:note1p0k8s8w9n4znqmmzh22jyzhljyxfsaxf6x8s54psund2xap8cersqn5xyf


I see people naming this cap “Thunberg”, in reference to Greta Thunberg. That after all the mimimi. The only thing that she accomplished was the EU to came out with this stupid bottle cap.


Today, after years carrying knives, mostly Victrorinox multi tool.
I see the point and the benefit of being able to open a knife with one hand.
Because the other is busy. So simple but never noticed it.

I’m afraid I will not be able to get back .
Already removed my Boker Worldwide 2, from my wallet and leaving only the SOG Powerpint and now SOG terminus XR
#edc https://image.nostr.build/c2f80cf950ff0c021e27176037d5c65d0f9967798fcf0f6778ae0565cebf5707.jpg


Never got a Leatherman, but also share the same feeling. Missing a feature or carrying too much. My way is to plan ahead the day activities. Then based on the type of activity I select what would fit better. When I don’t know, then I go with the minimum of knife, scissors and pliers.
Victorinox Handyman or SOG  Powerpint
#edc https://image.nostr.build/dbd9ea42ba344f928d4087521b32483bb4680b8c641b6317c12432759577091e.jpg


Today I left home and forgot my #EDC wallet with everything. I got that bad feeling of not being ready.

I grab my #emergency kit from the car and and took this #SOG Terminus XR and the flashlight that a work colleague gave me. Used both a lot today.
I’m really enjoyed the Terminus, that will carry from now on until the next discovery. It has three ways to open, like the #edc YouTubers  do to fast opening. https://image.nostr.build/a39ef1697710fef3a9b3536940838bcfaf32393780a0762978cf0ed1f586d37d.jpg


It’s interesting how we devote at least 1/3 of our day to a corporation that act as a capitalist, but inside reign as a controlled socialist entity with the employees.


Doing some apple juice
#edc

https://gravel.snowbla.de/uw183n.jpg


👋  GM and happy rate cut day everyone!

So I'm curious what Nostr thinks will happen next? Pump and crash? Nothin but pump? Something else?

https://m.primal.net/KtxN.png


Nothing


House rules: On Sundays the one that wake up late. Clean the breakfast table.


Tell me something. And I will forget.
Show me something. And I can remember.
Involve me. And I will understand.

- Come from china


Wondering if a BIOS update make things faster....NOOOO


Project started
Main parts ordered https://image.nostr.build/6c5a15a9da43594cdb8cb7ff62f361e1ce280703489c4d988f52561a9f168f0d.jpg


Last weekend camping
Carrying a knife on belt whole day, and quick to cut
#edc #knife #camping https://image.nostr.build/7a19630be692286253adfce24c677ab83d45c71e7253a973293fbd631107b0a0.jpg https://image.nostr.build/9a2c32dead2efa4dc4da98634f19bb45c99eafccf0e366272414f7c94b22fcfa.jpg https://image.nostr.build/d26cee6f3b37ff78c57d160f250032159948cfbda42a2e659f4f85a09ad0c339.jpg


Carry everyday what you need
Open every week to know what you carry everyday  #edc https://image.nostr.build/a798f1a62d6944b6f12a95b09cfddf572823822cca36080440bd618001a342af.jpg https://image.nostr.build/b0df938cec91434282d8f3b4a75835a50388189d23553e25293d6f424aba4b90.jpg https://image.nostr.build/b0df938cec91434282d8f3b4a75835a50388189d23553e25293d6f424aba4b90.jpg


sudo docker compose down


I found one use case for AI

When HR came and ask you to write job descriptions. You just ventilate the daily problems and the ask it to create a job description


Dashcam footage captures earthquake on a bridge https://video.nostr.build/894831ec6232e379a2286c891b373ecf09145e990a40af393b93001d1237c46b.mp4


Got a gift today from a colleague.

If I had space in my pocket it could become part of my #edc it has a smooth writing feeling https://image.nostr.build/8b28dac51378ef1cf8f95d1d02786bef3c34d957788f1598db3f9426162de531.jpg


Don’t meet your heroes


Taylor Swift analogyhttps://fountain.fm/clip/U9JfbTGx4ghc4CqTs3Nl


The worst thing a podcaster can do is asking for people to leave the feedback for a topic and boost, but then not read it in the next episode.

This is to podcaster that are coming to Nostr using Fountain to get some sats
#podcast #fountain #sats #v4v


When a friend invite for a dinner and you surprise everyone struggling to open the food. Always carry a plier.
#edc #sog https://image.nostr.build/0c8e561c7e9fc98a4f95bc798250ebfd43123ea09ca6427a0f9cc9726ab5103b.jpg


Are you happy with that?


Did a change in tools today
Watch and knife
#edc https://image.nostr.build/7db935a460c614f52457c5a561de01e10136dd6d54f0a48cd6dc22e8c5bb8cc6.jpg


Flying high https://image.nostr.build/c4872c06bf9fb167ac60fe5fe402ff65d9e80677aef8eaae54e6db183555c8cc.jpg


Question to the #nostr #damus community:
Where are the pictures stored when you post a picture using Damus?
I know that some good person that is providing this service.
But from the perspective of full sovereignty would be better if I control this storage place also.
I know that I can place a link to the image and it will display in the post, I’m been doing this, but is kind of annoying loading the picture and the copy and paste the link.

Is there any way to change the settings on Damus to point the picture storage server to another location?


Foggy morning to everyone https://image.nostr.build/95d202230eabddccfae00b715757b84c49576202006ed30dad83ea3dd6b534a9.jpg


Just do the damn thing


Mitä kuuluu?


openSUSE was the one
https://halsschmerzen.github.io/distrohopper-wheel/


See you any other day
https://travis.33co.de/qlq9x6.png


I know what push me to distro hopping.
I can't get things working and then I jump to another distro that I know is working.
At least I tried hard...but sometimes, nobody know why it didn't work


Meaningful rituals are becoming meaningless routines


 "Get off, get off the troll room, get out."
JCD

https://isobot.dev/isos/noagenda/20240808-182205-k4Ff86fj-get-off-get-off-the-troll-room-get-out.mp3


Got this new addiction to my EDC collection in discount at airport. From 179 by 53.7, 70% discount.
#EDC #edc #fossil https://image.nostr.build/c7b9db63416a551a815c1a209f066184ad8259dc2b7e456a0ed42659de1dda69.jpg


Funcionou


O fator complicador é a logística. Tu vai chegar num ponto que vai vender a embalagem que mantém o mel seguro. O transporte que realmente chega e de brinde vai dar mel. E viva o brasil.


Got one three years ago, battery last enough, some 3 to 4 hours. Can use whole day no ear pain due to pressure. What I dislike is the user interface. Still get confused when is on or off, always need to look if the mute light is on. And the best is the radio base, I don’t need to hassle with Bluetooth.


What’s on your pocket today?

#edc #pocketoday

I got a SOG PowerPint and  Böker Plus Worldwide 2.0 and many other small stuff in a Viperade VE28 https://image.nostr.build/c3f3d665f44e0b328b8ea198ea578ba989d7ebbe39c06d04f31acf9da4dc2a93.jpg


Setting up a new firewall

https://travis.33co.de/54gk07.jpg


Some of them

https://travis.33co.de/ff5t1w.jpg
#edc #knivesofmylife


😹😹😹 https://video.nostr.build/2b1e80803a659237997734acb10102bdafd8e3afe5aba953b275b1fcd0dda365.mp4


But, now I don’t know which one to #edc

https://travis.33co.de/fv7sm0.jpg


New tool just arrived

https://travis.33co.de/oclkac.jpg

#edc


a Field Watch where it deserve
#edc #fieldwatch
https://travis.33co.de/vef5al.jpg


The knives of my life #edc
https://travis.33co.de/kd5mr2.jpg
https://travis.33co.de/uwn0td.jpg


Got the big brother VE28 and VE18N.
Actually, the small VE28 is doing very well. if I could just fit the flashlight inside, it would be perfect.
#edc #viperade

https://travis.33co.de/1unsbq.jpg
https://travis.33co.de/hn881q.jpg


New #EDC to collection

https://travis.33co.de/047gxe.jpg
https://travis.33co.de/fw1146.jpg
https://travis.33co.de/9bad9s.jpg
https://travis.33co.de/ytg17e.jpg
#fieldwatch


It’s working


Added new knife to my #edc
Boker worldwide 2.0

https://travis.33co.de/88hrml.jpg

https://travis.33co.de/5asdyg.jpg


hahahha


it's taking ages...
https://travis.33co.de/11zhnb.png


Hello, if I wash one pair of pants it take 3 hours to dry, how long it will take to dry 3 pairs of pants?
1 free prompt(s) left. Start your free trial to get unlimited prompts.

To determine the time it will take to dry three pairs of pants based on the information provided, we can use the concept of proportionality. If one pair of pants takes 3 hours to dry, we can set up a proportion to find out how long it will take to dry three pairs of pants.

Let x represent the time it will take to dry three pairs of pants. The proportion can be set up as follows:

1 pair of pants / 3 hours = 3 pairs of pants / x hours

By cross-multiplying, we get:

1 * x = 3 * 3
x = 9

Therefore, it will take 9 hours to dry three pairs of pants based on the given information that one pair of pants takes 3 hours to dry. This calculation assumes that the drying conditions remain constant for all pairs of pants and that they are being dried simultaneously.


Aged like fine wine.
#tunestr https://www.youtube.com/watch?v=dGKwx-BFO0E


Jabriel mandando a real!

https://void.cat/d/9o2KM3j2gmaMS4ZU9ZajSv.mp4


Congrats


New terminal, worth try
https://travis.33co.de/clp568.png

https://app.warp.dev/referral/KPJNWX


https://travis.33co.de/u1w1lk.jpg

EDC of the gala day

#EDC


-19°C

https://travis.33co.de/c49904.jpg


Considering building a RPi5 with touch screen and ssd to become my edc ready to use computer.
#edc #raspberry #pi5

https://travis.33co.de/ulnue5.jpg


Privacy is like a strict diet.
Like the ice cream that you just can’t have it. Same apply to that fancy “thing” that destroys your privacy.


Sometimes we just need simple tools
#edc

https://travis.33co.de/cx9a31.jpg


It was a hard package…. Well… not
#edc

https://travis.33co.de/xd4p8g.jpg


Getting things organized, now just need to make it looks aesthetic
#edc

https://travis.33co.de/xbxgja.jpg


What do you have in your pocket today?


Sim alguém tem que estar lá pra dar a direção


Daily coffee

https://travis.33co.de/3fcwan.jpg


https://travis.33co.de/xb67gs.jpg
26.90 to 7 that’s 74%. Right?


Just talk to a person a asked if he was happy with the car. He put 75k€ in a Tesla Y. Then one month later the price drop to 50k


seems that nixos is quite straightforward when one knows what to do


Tem uma cerca perto


Não esquece de alugar a carreta


#Bookmark

https://geti2p.net/en/


Done


https://travis.33co.de/68z0hh.png

#linux #EWW #opensuse #tumbleweed


Relay is working, but as I updated the docker container and restarted everything it’s not syncing with old activity. I’m wondering what is wrong or if is like that


Seems to be fixed. But is it so that I can add relays only on the web interface, like on iris.to and not on Damus?


Having issue to connect my relay
Being relaying in others since September. Got it connected but not updating.


NATO around…. https://travis.33co.de/na7l6k.jpg


What is your best way to buy #Bitcoin  KYC free? Trying to put a more thorough list together. 👇🏻


Lost my note that I was writing…and stop when the kid’s woke up.
would be great if in the future there is a draft feature


Woke up 4:17 today, having time to what’s up at nostr… Still trying to figure out if it’s worth.
Anyway, was the first time I joined a conversation about real things. Not only zap or bitcoin stuffs…
Looks like things are moving forward


During hiring interviews I noticed that many people are trying to flee before the boat sinks. All sort of cases, one company the high end product didn’t catch the market, company is closing. Another, in semiconductor market, customers have stockpiled and there is no  demand now, causing cash flow issues.
Another company that built their revenue on subscription model. Customers are leaving because is non essential. Bankrupted.
And so it goes…


CTS-204P/CPM-20CV/Bohler M390 (Same steel, different companies, imo the best balance of edge retention, toughness, and stainless without compromising anything, it really doesn't get better than this. It's low maintenance and great at absolutely everything)

S35VN (Solid edge holding, toughness, affordable-ish, easily available, easy to sharpen, stainless, can't go wrong)

S90V/S110V (Crazy edge retention, chippier than pretty much everything else here due to high hardness, really hard to sharpen)

ZDP-189 (Crazy edge holding, not horrifying to sharpen, but chippy if used wrong)

M4 (This is what happens when you throw stain resistance out the window, it's an insane steel that has better edge retention than everything except S90/110V, but is tough as hell and doesn't chip easily)

3V (Same story as M4, but it's much tougher and edge retention is a bit worse off, but still pretty great, the best high end beater steel)

Elmax (Good, balanced high end steel, but hard to sharpen and imo overpriced for what you get)

S30V (Older version of S35VN, a bit chippier and a bit harder to sharpen than its newer counterpart, but overall solid)

CPM-154/Buck's 154CM (powedered formulation of 154CM, pretty good all-rounder, but cheaper than other powdered steels if you can find it on a non-custom knife. Bos (Buck's HT guy) is a fucking wizard and every steel he touches just turns... better)

https://www.reddit.com/r/knifeclub/comments/5mgr5j/personal_ranking_of_blade_steels/


deleted


In the past the bad guys wore mask

https://travis.33co.de/rsjqrv.jpg


https://travis.33co.de/m68q1s.jpg
I’m tired


Xitter v Nostr
https://m.primal.net/HLpO.jpg


Install openSuse